Monday, December 13, 2010

Two More Landspeeders!

OK, here's a couple more of the landspeeders that I've just finished off.



The White/Yellow landspeeder is the Sorosub V-35 'L-Kamino'.  It's based on the same toy as the "Lars Family Landspeeder" (posted earlier on the blog), but I've made a few modifications to give it a different feel.  Just like our cars come in different models (convertibles, hatchbacks, etc), I tried to make this a slightly different model of speeder, with a glamorous bubble canopy, larger side-mounted engines, and cargo room in the rear.  I removed the plastic canopy from the original model and filled in the gap on the top where the hinge was, and replaced the canopy with a clear-plastic bubble that I cut from a 'Woodland Scenics" Fir Tree 5-pack -- the packaging was a clear plastic clamshell and the top of each 'tree compartment' was the perfect size, once trimmed with some scissors.  The side engines are from the Micro-Machines Action Fleet "Gain Speeder", they were originally its guns that fired little toy rockets.  I think they look better as engine pods, with some little circular bits glued to the front and back.  The driver was s spare from one of the many WotC "Flash Speeders" that I dismantled to get their round bases, I cut off his head and replaced it with the head of a Wizkids 'Ghostfinder" miniature from their defunct Horrorclix game.  No model is safe in my collection!  It was then painted and dirtied up with weathering powders for that grungy "used universe" feel of Star Wars, particularly the vehicles you see on Tatooine.  I'm pleased with the way this one turned out, especially the wacky little 'El-Camino' style cargo area in the back!  (Thanks for the idea, Lyle!)

The Magenta landspeeder is based on a little keyring of "Anakin Skywalker's Airspeeder" from Attack of the Clones.  According to the Wookiepedia, it is a "Narglatch Airtech XJ-6 Airspeeder."  The keyring was part of the "Force Links" series of collectibles produced by Tiger Electronics around the time that the Clones movie came out, and I was able to pick up a couple very cheaply as they did not seem to be popular, probably due to their hideous yellow/orange/green color scheme!  Unfortunately, they were a little too small, probably 1/72 scale, so I needed to make the them look a little bigger to fit in with the rest.  Basically, I extended the rear engines with plasticard and putty by about 1/3 inch, added larger head-rests, and added some sort of frontal steering or propulsion fins alongside the engines.  These were inspired by the fins at the front of the Speeder Bikes, I figure that since landspeeders are using the same technology, they might have similar components.  These were just cut out of some simple plasticard shapes, and I added some thin plasticard rods to make them look like they are firmly attached.  With all these add-ons, the model finally looked the proper scale, albeit as a compact sports-car type vehicle.  The last bit was to give it a suitably racy paint job so that it will stand out from the crowd.  My wife really likes this one, and has claimed it as her speeder in the upcoming races!  (The other 'keyring speeder' is currently parked in the garage at Spaceport Speeders with a blown coolant regulator -- the repair parts are being shipped in from Mos Espa, but it's gonna be a while!)

Both of them were mounted on plastic bases torn off WotC "Flash Speeder" miniatures.

Looks like we have 10 completed speeders now, I need to do is get some suitably hazardous rocks and terrain built, and we'll be ready to race!

5 comments:

  1. Brilliant! I've enjoyed your whole series of speeders, buildings, etc. for Star Wars miniatures. Look forward to more of your excellent work.

    ReplyDelete
  2. Spotted this series of posts over of LAF and I have really enjoyed reading about the project.

    Thank you for posting.

    Tony
    http://dampfpanzerwagon.blogspot.com/

    ReplyDelete